Evaluation of chickpea (Cicer arietinum L.) seed inoculation with rhizobium strains and plant promoting rhizobacteria (PGPR) on growth indices and photoassimilate partitioning under rainfed and irrigated conditions
Volume 5, Issue 1, June 2014, Pages 45-56
https://doi.org/10.22067/ijpr.v1393i1.46094
Vahideh Khaleghnezhad, Farhad Jabbari
Abstract This experiment was carried out to evaluate the effect of rhizobium strains and plant growth promoting rhizobacteria (PGPR) on dry matter partitioning and some growth parameters of chickpea (Cicer arietinum L.) Arman cultivar. This research was conducted as split plot based on complete random block design at Zanjan university research farm. Irrigation levels (optimum irrigation during season growth and no irrigation during growth period) were set as main plots and fertilizer level (control or no application chemical and biological fertilizer, 50kg/ha Urea, seed inoculation with Mesorhizobium ciceri strain of SWRI-3, seed inoculation with Mesorhizobium ciceri strain SWRI-17, seed inoculation with PGPR, Co-inoculation with rhizobium strains SWRI-3+SWRI-17 and Co-inoculation with all biofertilizers, SWRI-3+SWRI-17+PGPR were sets as subplots. Based on results, SWRI-17 and SWRI-17+SWRI-3+ PGPR caused more allocation of chickpea photoassimilate to pods and less allocation of photoassimilates to stems and leaves under drought stress. Also, because SWRI-17+SWRI-3+PGPR allocated more photoassimilate to leaves under irrigated condition, caused effective solar irradiance absorption, produce maximum seed yield. Finally our data showed that, sees co-inoculation with rhizobium strains and PGPR resulted more seed yield in comparison with control (no fertilizer usage) or Urea fertilizer application under both irrigated and rainfed conditions.
Study on drought stress effects on morphological, physiological and biochemical characteristics of chickpea genotypes (Cicer arietinum L.) under field condition
Volume 5, Issue 1, June 2014, Pages 91-102
https://doi.org/10.22067/ijpr.v1393i1.46206
Ali Ganjeali, Raheleh Rahbarian, Abdolreza Bagheri, Saeed Malekzadeh-Shafaroudi
Abstract In order to evaluate of morphological, physiological and biochemical traits, related to drought tolerance, an experiment was carried out in field condition. In this study two commercial cultivars (MCC361, MCC358), three Kabuli and three Deci type of tolerant genotypes (MCC392, MCC537, MCC696, MCC873, MCC870, MCC10,) and three Kabuli and three Deci type of susceptible genotypes (MCC759, MCC588, MCC774, MCC45, MCC39, MCC101) were grown in Ferdowsi University of Mashhad research field. These genotypes were compared in shoot length, dry weight, leaf area, Fv/Fm, leaf water potential, prolin and protein content and catalase activity in the flowering stage. There was a significant positive correlation between prolin and protein content. Catalase activity also had significant positive correlation with dry weight and leaf area. Susceptible genotypes had lower Fv/Fm, leaf water potential, prolin content and catalase activity than tolerant genotypes. Accordingly, Fv/Fm, leaf water potential, prolin content and catalase activity were introduced as suitable markers for identification of drought tolerant genotypes. Commercial cultivar (MCC358) was introduced as a tolerant genotype because of higher Fv/Fm, leaf water potential, prolin content and catalase activity as compared to susceptible genotypes under drought stress.
Trend of changes for morpho-physiological characteristics of chickpea (Cicer arietinum L.) under salinity stress (NaCl) condition
Volume 5, Issue 1, June 2014, Pages 117-128
https://doi.org/10.22067/ijpr.v1393i1.46215
Mohammad Arefian, Saeedreza Vessal, Abdolreza Bagheri, Ali Ganjeali
Abstract Salinity is one of the most important widespread abiotic stresses which causes toxic and nutritional effects as well as loss of water absorption ability by plants. Plants respond to salinity with morphological changes. Due to high susceptibility of chickpea to salt stress, some physiological and morphological responses occur following the stress in this plant. Thus, different concentrations of salt stress (0, 8, 12 dS.m-1) impacts on morphophysiological characteristics were studied in candidate chickpea genotypes; a factorial experiment in a completely randomized design was performed with three replications and four sampling times of one week interval. The results indicated that the most tolerant and susceptible genotype to salinity were MCC760 and MCC806, respectively. By increasing the concentration of sodium chloride at week 4, root dry weight to shoot dry weight ratio increased 0.8 and 2 folds in these genotypes but root dry weight decreased 1.7 and 4 folds. At high stress level (12 dS.m-1), MCC760 genotype had not only the more photosynthetic pigments (including chlorophyll a, b and carotenoids) but also the rate was less in which its chlorophyll stability index (75%) was significantly higher than the others, indicating more than 30% significant differences compared with MCC806. The third week determined as more appropriate time to compare the physiological parameters in which MCC760 and MCC806 genotypes with 1.8 and 3.4 folds had significant difference and lowest relative water content. Overall, the data showed that MCC760 was the most tolerant genotype in response to salinity in this study and also the appropriate time for tolerant assessment were 4th and 3rd weeks after sowing based on Morphological and physiological parameters, respectively.
Bioassay and molecular tests of transgenic chickpea (Cicer arietinum L.) resistant to Helicoverpa armigera Hub.
Volume 5, Issue 1, June 2014, Pages 129-138
https://doi.org/10.22067/ijpr.v1393i1.46217
Parviz Ebadi Babajan, Nasrin Moshtaghi, Abdolreza Bagheri, Hassan Marashi, Saeed Malekzadeh-Shafaroudi
Abstract Pod borer is one of the main causes for yield loss of chickpea. Therefore, breeding of chickpea for resistance to this pest is important. The use of Cry toxin from Bacillus thuringiensis is an effective strategy for producing of transgenic resistant chickpea to this pest. These toxins are able to become active in the midgut of larvae and disrupt the insect's digestive system. We studied the stability and expression of cry1Ac gene obtained as T2 transgenic chickpea with cry1Ac gene and nptII gene with binary T-DNA in T3 and T4 generations of transgenic plants and observed the transgenic lines with cry1Ac gene and no nptII gene suggesting that separation between cry1Ac and nptII genes was occurred by recombination between two T-DNAs. In T3, PCR results showed that 6 of 25 putative transgenic plants had cry1Ac gene but all of them showed the nptII gene. From six samples with positive PCR in cry1Ac gene, five of them had positive results in RT-PCR reaction, confirming the expression of cry1Ac gene in transgenic lines. PCR results in T4 plants showed that 73 of 94 plants had cry1Ac gene and 81 of 94 samples included the nptII gene. In 10 samples cry1Ac gene separated from nptII gene. According ELISA results, in all samples tested, Cry1Ac protein was expressed in different concentrations. Bioassay tests showed that all pod borer larvae fed by leaves of transgenic plants, were dead, but all survived when the larvae were fed with leaves of non-transgenic plants. So, expected phenotype was observed successfully.
Effect of water deficit irrigation and natural products on vegetative characteristics of different chickpea (Cicer arietinum) varieties
Volume 4, Issue 2, December 2013
https://doi.org/10.22067/ijpr.v1392i2.41272
Mahdi Haghparast, Saeedeh Maleki Farahani
Abstract In order to investigate the effect of water deficit irrigation and natural products on vegetative characteristics of three varieties of chickpea, a field experiment was performed as split-split plot experiment in a randomized complete block design with three replications during 2011 growing season in Shahrood (Miami). The main plot was drought stress in four levels including normal irrigation (control), water cessation at flowering, podding and flowering to physiological maturity stages. The sub plot was spraying with natural products in three levels including spraying with distilled water (control), spraying with humic acid and spraying with seaweed extract and sub-sub plot was three chickpea varieties Hashem, ILC482 and Local (Miami). The results showed that the effect of drought stress on number of the main and lateral branches was significant. Also the effect of variety was significant on number of the main and lateral branches, plant height and width. Drought stress especially from flowering to harvest stages decreased growth of all varieties by reducing branches and canopy diameter. However, natural product spraying especially with seaweed extract reduced detrimental effect of drought stress on plant growth. The variety Local had more natural products use efficiency although variety Hashem was superior in all parameters.
Study of gene expression pattern of Cu/znSOD and SOD enzyme activity under drought treatment in tolerant and sensitive lines of Chickpea (Cicer arietinum L.)
Volume 4, Issue 1, June 2013
https://doi.org/10.22067/ijpr.v1392i1.33511
Seyed Reza Hashemi, Saeed Malekzadeh, Seyed Hassan Marashi, Ali Ganjali
Abstract Chickpea (Cicer arietinum L.) is mainly cultivated in arid and semi-arid agricultural systems. Drought stress is a major factor delimiting maximum yield. This research evaluated the effects of drought stress treatments on expression of Cu/znSOD as a gene involving in drought tolerance by Real time PCR technique. To find the probable relationship between the molecular and physiological effects of treatments, total soluble leaf protein and enzyme activity of SOD (EC: 1.15.1.1) were measured. Drought stress was applied by 30% of field capacity in flowering stage. Sampling was arranged on three times; pre stress, 48 hours after stress and 24 hours after recovery period. This study conducted as a factorial experiment in randomized complete block design with three replications. Real time PCR data analysis indicated that the expression of Cu/znSOD between the two genotypes, candidate for tolerance (MCC696) and sensitive genotype (MCC759) was not significantly different from control condition. But the gene expression of Cu/znSOD in international genotype (MCC877) was more than other two genotypes in control condition. Consistent with some previous research results, gene expression levels of Cu/znSOD was reduced in two days after drought time than control, and increased in recovery stage compared to control plants. The measurement of total soluble leaf proteins and SOD enzyme activity under drought condition treatments revealed no significant difference compared to control conditions.
Effects of rhizobiums sush inoculation and fertilizer on yield and yield components of chickpea (Cicer arietinum) in Khorasan-Razavi
Volume 4, Issue 1, June 2013
https://doi.org/10.22067/ijpr.v1392i1.33514
Mohamad Ghasemzadeh Ganjei, Ahmad Asgharzadeh
Abstract In order to evaluate the efficiency of inoculation of chickpea seeds with Mesorhizobium and application of nitrogen on yield and yield components of chickpea an experiment was conducted in Research Station of Neishobour, Khorasan-Razavi. The experiment was conducted in randomized complete block design (RCBD) with four replications and 13 treatments including Mesorhizobium (SWRI 1, 2, 3, 6, 9, 12, 13, 14, 15), nitrogen levels (70 and 140 mg/Kg from urea source), zinc (25 Kg.ha-1 from zinc sulphate source), and the control. Results showed that differences of grain and biological yield among treatments were significant (P
Investigation of phenological and morphological characteristics and correlation them with yield in chickpea (Cicer arietinum L.) cultivars under drought stress and N fertilizer in Kermanshah province
Volume 4, Issue 1, June 2013
https://doi.org/10.22067/ijpr.v1392i1.33744
Morad Shaban, Siros Mansourifar, Mokhtar Ghobadi, Seyed Hosein Sabaghpoor
Abstract This study was performed in order to evaluate the effects of drought stress and nitrogen fertilizer on phenology, morphology and yield of four cultivars of chickpea. This experiment was performed in a split-factorial using randomized complete block design with three replications. Drought stress treatment stood in main plots (in three levels) consisting of no drought stress (control), moderate drought stress (irrigation at planting and early flowering) and severe drought stress (no irrigation). Combination of nitrogen fertilizer (in two levels 0kg N/ha and 25kg N/ha) and cultivar treatment (four cultivars Azad, Bivanij, Hashem and ILC482) stood in sub plots. Results showed that drought stress had significant effect on phenology and morphological traits, biomass yield and grain yield. Increase of drought stress lead to reduce of growth period, plant height, biomass yield and grain yield. Among cultivar treatments, Bivanij had shorter phenological stages time as complete ripening and prepared of harvesting in 82 day in high water stress and had a highest biomass and grain yield. Hashem cultivar had a maximum growth length. Also, Nitrogen fertilizer had a positive effect on grain yield in non stress condition.
Evaluation of cold tolerance in winter sowing of chickpea (Cicer arietinum L.) using morphological and phenological traits in Kurdistan region
Volume 4, Issue 1, June 2013
https://doi.org/10.22067/ijpr.v1392i1.33747
Heydar Naderi, Majid Shokrpoor, Ali Asghari, Homayon Kanooni, Ezat Esfandiari
Abstract Winter sown chickpeas produce more yields in comparison with spring type. This function is hampered by the sensitivity of the crop to low temperature. In order to study and identify high yielding and cold tolerant chickpea (Cicer arietinum L.) lines, 65 entries along with one susceptible check variety namely ILC533 were evaluated in a randomized complete block design (RCBD) with two replications during 2010-11 cropping season at Saral Agricultural Research Station of Kurdistan province, west of Iran. Cold tolerance was investigated via viability percentage and cold tolerance rate parameters. Analysis of variance revealed that there were significant differences among the lines for plant height, 100 seed weight, seed yield and cold tolerance rate. Significant negative and positive correlations were found among yield and cold tolerance rate and viability percentage, respectively. The cluster analysis, categorized the lines into three distinct groups. According to this study, 14 lines having 3 and less than 3 of cold tolerance rate, 80-95 viability percentage and more than 141g/m2 seed yield recognized as superior lines for cold tolerance.
Effects of planting date and density on yield, yield components and protein content of three chickpea (Cicer arietinum L.) cultivars under rainfed conditions in Ilam province
Volume 2, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v2i2.19018
Rahim Naseri, Ata Siyadat, Abas Soleymani Fard, Reza Soleymani, Hamid Khosh Khabar
Abstract In order to study the effects of planting date and plant density on yield and its components in three chickpea (Cicer arietinum L.) cultivars in rainfed conditions of Ilam, a field experiment was carried out using split plot design as factorial by complete randomized block design with three replications at Shirvan-Chardavol Agriculture Research Station during 2008-2009. Sowing dates were assigned to main plots at two seasons planting (autumn and spring), plant density (20 and 40 plants/m2) and three cultivars (Arman, Hashem and Azad) were arranged as randomized in sub-plots. Results indicated that grain yield and yield components were affected by planting date and autumn planting produced the highest grain yield (1578 kg/ha). Number of pods per plant, grain yield, 100-grain weight and harvest index were affected by planting density. The highest grain yield obtained from plant density of 20 plants/m2. In this experiment, all traits were affected by cultivars and Azad cultivar showed the highest grain yield and its components. Interaction effects of planting date × plant density × cultivars had a significant effect on grain yield. The highest grain yield (1940kg/ha) obtained from Azad cultivar in autumn sowing date at the rate of 20 plant/m2. Using soil and environmental factors in autumn planting of Azad cultivar resulted in produce of maximum yield and yield components. Complementary researches were recommended for achieving applied results.
Effect of supplementary irrigation and compost application on morphological traits and yield of two chickpea (Cicer arietinum) cultivars
Volume 3, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v1391i2.24696
Mohamadreza Tadayyon, Alijafar Ghorbaninejad
Abstract To investigate the effects of supplementary irrigation and application of different compost levels on morphological traits, yield and yield components of two chickpea cultivars under dry land conditions, a field experiment was conducted at the research field in Khoramabad, Iran in 2009-2010. The experiment was split split plot based on randomized complete block design with four levels of irrigation (no irrigation as control, supplementary irrigation at flowering, at grain filling, and at flowering + grain filling stages along) with three levels of compost (0, 10 and 15 t.ha-1 as sub factors) and two chickpea cultivars (Greet and Filip93-93) as sub-sub factors. Results indicated that the highest number of main shoot (3.63), branches (14.61), pod/plant (36.68), seed/plant (39.26), plant height (38.6 cm), 1000 seed weight (291.5 g), grain yield (1688 kg/ha) and biological yield (4898 kg/ha) were obtained from supplementary irrigation at flowering + grain filling stages from Greet cultivar. The maximum grain yield was obtained from interaction of supplementary irrigation and application of 15 t.ha-1 compost. Due to increase of chickpea cultivar yield under supplementary irrigation and compost in dry farming conditions, therefore such plant is recommended for dry farming at Khoramabad region.
Genetic analysis of earliness in chickpea (Cicer arietinum L.) using generation mean analysis
Volume 2, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v2i2.19036
Ezat Karami, Hosein Sabagh Pur, Mohamadreza Naghavi, Mohamad Taeeb
Abstract This experiment was conducted to determine gene action for different traits of chickpea including days to 50% flowering, days to maturity, plant height, 100-seeds weight, number of pods per plant and seed yield. Five genotypes including Arman, Hashem, ILC588, ICCV2 and ILC3279 were selected and crossed with each other. Four generations of each cross along with parents were evaluated in a randomized complete block design with three replications. In each replication 15 plants for P1, P2 and F1, 30 plants for BC1 and BC2, and 60 plants for F2 were evaluated for all traits. Joint scaling test and chi-square test were used to estimate the gene action. The Chi-square of simple three parametric models was significant for all traits except for plant height, indicating the presence of non allelic-interactions in the inheritance of these traits in chickpea. Both additive and dominant genetic effects were significant for days to 50% flowering, days to maturity, number of pods per plant and seed yield. In addition, presence of high amount of dominant effect and dominant × dominant interactions suggests the importance of non-additive genetic effects for these traits in chickpea. Therefore, selection for these traits in early generations could not be effectively successful. However, additive genetic effects play an important role in the inheritance of plant height and 100-seed weight, promising selection for these traits in early generations during the process of chickpea breeding.
Study on effect of sowing date and plant density on grain yield and yield components of improved chickpea (Cicer arietinum L.) Kabuli type var. Arman
Volume 3, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v1391i2.24700
Rahim Bayat, Seyed Hosein Sabaghpour, Ali Hatami, Ali Ashraf Mehrabi
Abstract In order to evaluate the effect of different levels of sowing dates and plant density on grain yield and its components in chickpea var. Arman, a field study was conducted at Ekbatan Research Field Station of Agricultural and Natural Resources Research Center of Hamedan province under rainfed condition during 2009-2010 cropping season. Treatments were arranged as split plot on the basis of randomized complete block design with four replications. The main plots were date of sowing in three levels including Entezari (16 December), spring planting (7 March) and late spring planting (4 April) and the sub-plots were plant densities (20, 30 and 40 plants/m2). Results showed that pod number per plant, 100-seed weight and grain yield were affected by sowing dates, significantly. The results also showed significant differences for pod number per plant, grain yield and harvest index in different plant densities. The interaction of sowing date×plant density was significant (p< 0.01) only for seed yield. Finally, the highest and the lowest seed yield was achieved in Entezari planting with 30 plants/m2 and late spring planting with 40 plants/m2.
Evaluation of tolerance to salinity based on root and shoot growth of 11 drought tolerant and sensitive chickpea genotypes at hydroponics conditions
Volume 2, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v2i2.19045
Mohamad Zare Mehrjerdi, Jafar Nabati, Ali Massomi, Abdolreza Bagheri, Mohamad Kafi
Abstract Salinity is a major environmental problem in arid and semi-arid areas. Chickpea (Cicer arietinum L.), like other legumes is sensitive to salinity. Therefore, selection of genotypes to grow on saline areas is important. Eleven chickpea genotypes (as sub plots) were grown in the greenhouse conditions on a medium containing different NaCl concentrations (8 and 12 dSm-1) and control (Hoagland solution) as main plots. The results showed that salinity reduced membrane stability index, green leaf area, the percentage of shoot and root dry matter, plant height, number of branch and root to shoot dry weight, significantly and increased leaf relative water content in all genotypes. Membrane stability index (0.61 and 0.73) and green leaf area to total leaf area ratio (0.68 and 0.56) in genotypes showed a positive correlation with shoot and root dry matter, respectively. Biplot on resistance index based on dry matter production showed that amomg drought tolerant genotypes, MCC696, MCC544 and MCC877 are least and MCC760 is the highest salt tolerant genotypes. In this study, except MCC873, other drought sensitive genotypes were categorized in the salt tolerant group. Therefore, it seems that drought tolerant genotypes are not necessarily salt tolerant. Generally, in order to achieve the drought and salinity tolerant chickpea varieties, the genotypes for both traits should be selected.
Evaluation of some pulses and other crops sensitivity to Metribuzin simulated soil residue
Volume 3, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v1391i2.24705
Seyedeh Fatemeh Fakhrerad, Ebrahim Izadi Darbandi, Mohamad Hasan Rashed Mohassel, Mohamad Hassanzadeh-Khayat
Abstract To evaluate the sensitivity of different crops included some pulses to simulated metribuzin soil residues, an experiment was conducted in completely randomized design with factorial arrangement and four replications in Research Greenhouse of College of Agriculture, Ferdowsi University of Mashhad. Treatments included of 8 crops (chickpea, common bean, lentil, corn, wheat, barley, rape seed and sugar beet) and concentrations of metribuzin simulated residue in soil at 6 levels (0, 0.016, 0.032, 0.064, 0.128 and 0.160 mg a.i. kg-1 soil). Plants survival percentage and shoot and root biomass were measured 30 days after emergence. Plants response to metribuzin soil residue fitted with 3 and 4 parameters logistic equations to the shoot and root biomass data as a function of the herbicide soil residue concentrations and was used to calculate the dose for 50% of measured traits (ED50). Results showed that the survival and shoot and root growth were affected by metribuzin soil residue, significantly (pchickpea>common bean>corn.
Determination of cardinal temperatures and thermal time requirement during germination and emergence of chickpea genotypes (Cicer arietinum L.)
Volume 2, Issue 2, December 2012
https://doi.org/10.22067/ijpr.v2i2.19070
Ali Ganjeali, Mehdi Parsa, Reza Amiri-Deh-Ahmadi
Abstract Determination of cardinal temperatures during seed germination and emergence as well as the thermal time requirement for each stage is essential in crop management and modeling of plant growth and development. Two experiments were conducted to predict cardinal temperatures and thermal time requirement for germination and emergence of chickpea genotypes. In the first experiment, seed germination responses of six chickpea genotypes (MCC361, MCC951, MCC180, MCC873, MCC13 and MCC463) at seven temperature regimes (3, 5, 10, 15, 20, 25, 30 and 35°C) in a controlled condition were evaluated. The trial was carried out as split plot based on a completely randomized design with three replications using 10 seeds per Petri dish. Seed germination percentages and days to 50% germination (cumulative) were determined. Cardinal germination temperatures using non-linear regression between germination rate and temperature (R50 as y and T as x) were estimated. Temperature function, Dent like model was used to determine seed germination rate. In the second experiment, traits mentioned in first experiment were studied for emergence of chickpea genotypes, with nine planting dates considered as main plots. Therefore, the experiment conducted as split plot based on a complete block design with three replications in the soil. Based on the results, both base temperature for germination and emergence were stable traits and there were not significant differences among genotypes in this respect. Average base temperature of genotypes for germination and emergence were estimated 4.2˚C and 6.1˚C, respectively. Also, the average optimum temperatures of genotypes for germination differed from 20.4˚C to 26.5˚C, respectively and for emergence they were differed from 24.0˚C to 26.8°C, respectively. There was no considerable genetic diversity for physiological days and thermal time required for germination and emergence of chickpea genotypes. There was a highly significant positive correlation between observed and predicted days to germination and emergence of chickpea using Dent like model. Therefore, this model can be used for simulating germination and emergence times of chickpea.
Evaluating of the morphological and phenological characteristics of cold tolerant chickpea (Cicer arietinum L.) genotypes at Entezary sowing in Mashhad conditions
Volume 3, Issue 1, June 2012
https://doi.org/10.22067/ijpr.v1391i1.21032
Hosein Sedaghatkhah, Mehdi Parsa, Ahmad Nezami, Abdalreza Bagheri, Hasan Porsa
Abstract In order to evaluate phenological and morphological responses of cold tolerant chickpea genotypes to Entezary culture in Mashhad conditions, 81 cold tolerant chickpea accessions were cultured during growing year 2006-2007 in Research Farm of Faculty of Agriculture, Ferdowsi University of Mashhad. The experiment was carried out in lattice design with three replications including 9 blocks per replication and 9 plots per block. Results showed that there were significant differences among genotypes in terms of developmental traits including: sowing to emerging, emerging to flowering, flowering to podding and podding to maturity; and morphological traits including: plant height, number of branches per plant and sum of branches length per plant. Survival percentage (ratio of remaining plants at harvest date to the number of sowed seeds) in the 73% of samples was more than 75%. Furthermore, seed yield for 32% of tested genotypes was more than 40 g/m2. Vegetative growth duration, reproductive growth duration and plant height were the most important characteristics in seed yield determination. Based on these results and regarding to the remarkable yield of some studied accessions, it appears that some of the chickpea genotypes in collection of Mashhad with suitable agronomical characteristics, have appropriate potential for Entezary culture.
Evaluation of selection to drought by PEG in hydroponic condition of twelve chickpea (Cicer arietinum L.) genotypes
Volume 3, Issue 1, June 2012
https://doi.org/10.22067/ijpr.v1391i1.21034
Mohamad Zare mehrjerdi, abdalreza Bagheri, Ahmadreza Bahrami, Jafar Nabati, Ali Masomi
Abstract Late-season drought is the major constraint reducing the productivity of chickpea. This experiment was carried out to study response of root and shoot characteristics in 12 chickpea genotypes to drought stress. Two-drought stress levels (-3 and -6 Bar) induced by PEG 6000 and control in hydroponic condition at green house was performed. Leaf relative water content (RWC), plant height, number of branches, root length, shoot and root biomass measured two weeks after drought imposition. In addition, drought susceptibility and resistance indices based on biomass calculated and correlation matrix was obtained among the traits studied. Result showed that leaf relative water content (RWC), plant height, branch number and shoot and root biomass significantly reduced by water stress and root length increased in -3 bar compare with control condition. Biplot analysis on drought resistance indices showed that MCC783 and MCC877 genotypes with 2.87 and 1.54 g/plant had the highest and lowest dry matter production, respectively. It seems that selection for drought tolerance of chickpea genotypes in hydroponic condition is not applicable to soil condition.
